iRace Classifieds
Websites
Sat, Jul 24 2010 11:47
| Permalink
Websites for your team, driver, car or small business. Mumbo Media will design a site to suit your requirements and help get your message across.
I offer everything from the most simple one-page site to complicated multi-page sites. Regardless of the site complexity I make sure it is simple enough so that updating the site is no more complicated than writing an email.
Click the images below to see examples of my work.
Click here to get in touch for a quote or to discuss your new website.



I offer everything from the most simple one-page site to complicated multi-page sites. Regardless of the site complexity I make sure it is simple enough so that updating the site is no more complicated than writing an email.
Click the images below to see examples of my work.
Click here to get in touch for a quote or to discuss your new website.



Racepak IQ3 Data Logging Dash
I have a brand New Haltech - Racepak IQ3 Data Logging dash for sale. This one replaced the near new one I had. I had one dead pixel on the older model screen and they sent me a new one of the current updated model. It logs predictive laps via GPS and collects information via inbuilt G meters, keep track of multiple items such as oil and water temp, gear, revs and it has the multi led shift lights that work their way from either side to centre red on shift. It has warning led's if you set them. You can complete track maps and overlay them to enhance your driving or compare lines, braking points and disect every corner as a stand alone. I also have a six meeting old Haltec Platinum Sport 2000 ECU set for my Proton but programmable for anything including V8's Call for this one. The Dash sells for $2300 but I have a quick price.PRICE: $1,800CONTACT: 0414-670357
Scania + Trailer
Mon, Jul 5 2010 02:27
| Trailers and Transporters
| Permalink
Scania P92 + 42ft trailer, which carries 2 large cars. Trailer has a two ton tail lift, 5.5 kva generator,tyre racks, extensive belly lockers, 240 volt power throughout, lots of workbenches which fold down for car space, and heaps of storage, including overhead storage and cupboard for race suits. Included is a full side annexe and awning, with clip-lock flooring of approx. 50 square metres, plus a rooftop observation deck. Prime mover has long range fuel tanks, good tyres, alloy bullbar, driving lights, stereo and CB + NSW local registration to October 2010. The trailer has registration to March 2011. The Scania and trailer are both very well maintained units and ready for racing!
For a complete information pack, please email paul@moveforce.com.au
PRICE: $44, 000 (Scania + Trailer) or $30,000 (Trailer only)
CONTACT: Ph: 0425 231 027

For a complete information pack, please email paul@moveforce.com.au
PRICE: $44, 000 (Scania + Trailer) or $30,000 (Trailer only)
CONTACT: Ph: 0425 231 027

HDT Cup Commodores
Six Ex Trackskill cars for sale.
These cars are for sale "as is". could suit HDT Cup or built into IPC car.
$6,800 ono ea or negotiate for the lot.
PRICE: $6,800 ono ea
CONTACT: Peter 08 9306 8022
These cars are for sale "as is". could suit HDT Cup or built into IPC car.
$6,800 ono ea or negotiate for the lot.
PRICE: $6,800 ono ea
CONTACT: Peter 08 9306 8022
Holden Special 'Chilli Roadster'
Sat, May 15 2010 01:18
| RocketSports, Sports Cars
| Permalink
A very unique Roadster. It is based on a 1960 Indy Watson Racecar, has a fiberglass body, jig built chassis and uses a 202 (LPG) HQ/HZ running gear. It weighs approx 800kgs and zips around the road &track. It is a fun car & as there is only two registered in NSW it certainly gets the looks.
The car as an Individually Constructed Vehicle (ICV). It was built using a custom chassis, body and a selection of donor parts from the H Series Kingswood’s to comply it for registration.
I built the car in 2003 with Rob Rowe of Rob Rowe Automotive, who is a well known and respected Historic Race Car Builder and first had it registered in December 2003.
Since building the car it has completed around 1,000 klms as I have the prototype which was built in 2002 which I use more regularly
The motor is a standard 202 bottom, with a HQ race cam and the head has had a little work. The gas system runs the Gas Research Carby on the bigger two barrel manifold.
The box is a 3speed M20 and runs back to a standard Banjo rear end.
We currently have four dedicated race cars that are campaigning again this year and a couple more are being built.
PRICE: $29,000 (incl.GST) Negotiable
CONTACT: Rod 0419 468 303

The car as an Individually Constructed Vehicle (ICV). It was built using a custom chassis, body and a selection of donor parts from the H Series Kingswood’s to comply it for registration.
I built the car in 2003 with Rob Rowe of Rob Rowe Automotive, who is a well known and respected Historic Race Car Builder and first had it registered in December 2003.
Since building the car it has completed around 1,000 klms as I have the prototype which was built in 2002 which I use more regularly
The motor is a standard 202 bottom, with a HQ race cam and the head has had a little work. The gas system runs the Gas Research Carby on the bigger two barrel manifold.
The box is a 3speed M20 and runs back to a standard Banjo rear end.
We currently have four dedicated race cars that are campaigning again this year and a couple more are being built.
PRICE: $29,000 (incl.GST) Negotiable
CONTACT: Rod 0419 468 303

Motec ADL Dash Logger
3IO Update1 Mg Logging Memory Enabled
Pro Analysis Enabled
Dual Lambda Enabled
Comes with a bare loom & connections that needs to be shrink wrapped.
Retail Value New $10500.00
PRICE: $6500.00 ono
CONTACT: 0416 212 048
GTI Proton Satria #39
Mon, May 3 2010 03:29
| Production Racing Cars
| Permalink
It's time to sell the Class C 2nd place car for 2009. The car is ready to race and is the cheapest car in Australia at $10k.It will not come with the Haltech ECU, Racepak Dash or the dry fuel break but I am negotialble on these and would like to sell the whole package complete.
It does come with spare engine, 2 gearboxes and many panels. It has a KAAZ limited slip diff. It will come with the Unichip ECU if you dont want the full package. Over 10 wheels and has near new A048's on the car.
The car must go for the build of my new HSV R8 12 Hour car. Serious offers only please.
PRICE: $10,000
CONTACT: 0414 670 357
Torana Genuine LH SLR5000 L31
Mon, Apr 5 2010 01:51
| Muscle Division, Touring Cars, HDT Cup
| Permalink
Cams approved race car with trailer. Turn key race set up. Location in Brisbane near Lakeside. Can deliver to Lakeside for test run,( has side Mega phone, so will need to change for a full run) or just drop in. Everything done ready to race.
PRICE: $30,000 ono
CONTACT: ph 0428 720 099
PRICE: $30,000 ono
CONTACT: ph 0428 720 099
Triumph TR7 TR8
Sun, Apr 4 2010 03:25
| RocketSports, Sports Cars
| Permalink
Contact: Matt 0411 736 980
Price: $27,000
ISUZU FRR 500 LONG
Fri, Mar 5 2010 04:21
| Trailers and Transporters
| Permalink
Year: 1997
Body: C/CHAS
Engine Size: 8.2l
Fuel Type: diesel
Km's: 170000
Colour: White
Location: NSW - Sydney
Features:
Air Conditioning, CD Player, Power Steering
Description:
This truck is in very good conditiond serviced regularly, It has 22 ft pantech that is used for recording outside Television events locally and interstate, The truck has not carried heavy loads & has not done city driving. It also includes 2 seperate airconditioning units in the pantech, and is fitted with storage bays.
Price: $34,900.00
Contact Tracy: 02 9438 2088 or 02 9438 3099 or thannah@ave.com.au
HDT Cup/Rally VH SS
This car belongs to a friend of mine. It would make a very very good HDT Cup/Muscle Div car.
It is listed on Ebay, so if you need to contact him please do so via Ebay. But if you get really desperate, drop me a line and I'll try and chase him up for you. Jon Worrell.
EBAY LINK
Price: $6,000
It is listed on Ebay, so if you need to contact him please do so via Ebay. But if you get really desperate, drop me a line and I'll try and chase him up for you. Jon Worrell.
EBAY LINK
Price: $6,000
Wanted: Dymag 17x11 and 17x9.5 wheels
WTB Dymag wheels sizes 17x11 and 17x9.5 five spoke wheels. Some of these wheels will have Perkins or Corvette wording cast into them.
Contact Brett Henderson: bv1953@aol.com
Contact Brett Henderson: bv1953@aol.com
9" x 17 Rays wheels and almost NEW Pirelli slicks
4 x 9" Rays rims $550 the set
The rims have served me faithfully and are extremely strong.
Suit RX-7 and some Nissans, Toyotas, Ford, FPV.
+38 offset x 114.3 x 5
4 x Pirelli slicks used for one weekend only. Two heat cycles. $600 the set. The slicks were purchased new for the W300 in November 2008 and were used in Qualifying and the first hour only. Still very usable. Always stored in black bags indoors. They never got mounted on the car in 2009 because I never made it to a race start and I use other rims/tyres for transport and practice.
$990 if you want the 4x 9" rims plus these 4 slicks
OR make an offer if you are buying all 8 Rays Silver Arrow rims with the 4 x Pirelli wets and these 4 slicks
Pick up from Windsor (On main road between Airport and Bathurst) or if you want to get your courier I can co-operate.
I am going to Bathurst next week and can take them up there if anyone wants but payment or at least a deposit first. Space is limited.
Delivery arranged anywhere with TNT. Good rate.
Steve 0428 219888
The rims have served me faithfully and are extremely strong.
Suit RX-7 and some Nissans, Toyotas, Ford, FPV.
+38 offset x 114.3 x 5
4 x Pirelli slicks used for one weekend only. Two heat cycles. $600 the set. The slicks were purchased new for the W300 in November 2008 and were used in Qualifying and the first hour only. Still very usable. Always stored in black bags indoors. They never got mounted on the car in 2009 because I never made it to a race start and I use other rims/tyres for transport and practice.
$990 if you want the 4x 9" rims plus these 4 slicks
OR make an offer if you are buying all 8 Rays Silver Arrow rims with the 4 x Pirelli wets and these 4 slicks
Pick up from Windsor (On main road between Airport and Bathurst) or if you want to get your courier I can co-operate.
I am going to Bathurst next week and can take them up there if anyone wants but payment or at least a deposit first. Space is limited.
Delivery arranged anywhere with TNT. Good rate.
Steve 0428 219888
HDT Cup 5.0L 308ci Motor
Ok up for sale is my old motor out of my VH Commodore. This motor needs a REBUILD it has spun 2 bigend bearings and the crank is marked and 2 rods look like they have gotten hot. Ok now to the good bits this motor has VN Commodore heads (have been shaved) and also has VN rods BIG cam (I can't remember the spec's But I know it comes on at 3000rpm). The motor is fitted with a Redline single plan manifold with a freshly worked Rochester carby, The motor also comes with a complete Exhaust and a set of Extractors this motor was making over 300HP at the wheels and would be good for any track car and would do well in HDT cup.
If you click on the link below it will take you to a video of the motor going around Bathurst.
http://www.youtube.com/watch?v=hZBTPfpfm3w
PRICE: 1000.00 ono
CONTACT: 0410651606
If you click on the link below it will take you to a video of the motor going around Bathurst.
http://www.youtube.com/watch?v=hZBTPfpfm3w
PRICE: 1000.00 ono
CONTACT: 0410651606
Pirelli Wets and Rays Wheels
They are perfect wets. Never been raced on. No further use. Always stored indoors in black bags. Very soft. They were incredibly grippy when I ran them in in October 2009.
Wets $1200 the set
OR $1400 if you want the 4 rims plus 4 wets mounted
Pick up from Windsor (On main road between Airport and Bathurst) or if you want to get your courier I can co-operate.
Delivery arranged anywhere with TNT. Good rate.
Steve 0428 219888
Motec Advanced Dash Logger
Motec ADL Complete unit (Ex Nat. Series Formula Ford - V8 Supercar spec unit) Unmarked dash with internal logger, Suit Open Wheeler or Sedan. Price inc: Dash unit, 79 pin Gen. motec Loom with military spec plugs, Various sensors, steering wheel mountable Mode / Select buttons, LED shift light, Beacon, Receiver, Pwr lead, Tri-pod, Battery & Charger
Under half new price. All in Excellent - New Condition. Free postage Australia wide!
PRICE: $6,500 Neg.
CONTACT: 0404804859 or russellnewell@hotmail.com Email for further info and Pics

Under half new price. All in Excellent - New Condition. Free postage Australia wide!
PRICE: $6,500 Neg.
CONTACT: 0404804859 or russellnewell@hotmail.com Email for further info and Pics
Class Winning HDT Cup Commdore
Sat, Jan 2 2010 08:00
| Muscle Division, HDT Cup
| Permalink
Sold!
This car has had a full rebuild in the past few months, brand new 253 race motor, rebuilt m21 box, rebuilt diff, 330mm front brakes with VE Twin Spot Calipers, Rear brakes are 315mm with VE rear calipers, new Brake booster mod to fit VX master cylinder, full Pedder suspension including everything possible (Springs, shocks, bushes, adjustable camber tops, adjustable Castor rods), 16" rims with near new Bridgestone Semi Slicks, Sabelt Taurus Race seat with New harness, Car fully rewired front to back. This is a very clean, tidy, reliable, quick car.
This car has a current iRace log book, this car was the original Commodore Cup Display vehicle, Cage was built to commodore Cup Specs.1st place in Class B 2009 HDT Cup, 2nd Place Overall.
Nothing to spend, ready to race.
Contact me for more specs and pics.
Only selling to upgrade.
Price: $12500
Contact: Troy 0410 480 534
Proton Satria GTi Production Racing Car
Wed, Dec 16 2009 10:12
| Production Racing Cars
| Permalink
This is a great little Class C car and a great way to go racing in 2010. Parts are readily available and relatively cheap.
Has a good engine fitted, gearbox and clutch recently reconditioned. very economical to run and maintain.
6 wheels with Federal/Kumho tyres, also various spares to complete the package including spare engine, drivers door etc.
Has a few minor battle scars from this season which have been allowed for in the bargain price.
$12,500
Can deliver if required. Call Hans on 0414 670 026.
Mazda 3 MPS Production Racing Car
Mon, Dec 14 2009 02:24
| Production Racing Cars
| Permalink
2007 model Mazda 3 MPS Production Racing Car offered for sale. This car won the 2009 Class A Production Racing Car Championship.2.3 litre Turbo engine, 6 speed manual gearbox, Murray Coote suspension, DBA 4K brake rotors and Endless Enduro pads.
$33,000 or best offer.
Contact Clark Stott or check out the listing on My105.com
Radical SR3 LeMans Sports Car
Fri, Dec 11 2009 01:53
| LM Sports, Prototypes, Sports Cars
| Permalink
Radical SR3 2004 model2004, SR3 model
1498cc Hayabusa engine
$79850
Contact Rick Otten 0418 251 000 or 0408 471 199 or 02 4861 6626
