iRace Classifieds

Websites

2010-07-24T23:47:00.001-07:00

Websites for your team, driver, car or small business. Mumbo Media will design a site to suit your requirements and help get your message across.

I offer everything from the most simple one-page site to complicated multi-page sites. Regardless of the site complexity I make sure it is simple enough so that updating the site is no more complicated than writing an email.

Click the images below to see examples of my work.

Click here to get in touch for a quote or to discuss your new website.

Racepak IQ3 Data Logging Dash

2010-07-24T19:42:00.001-07:00

I have a brand New Haltech - Racepak IQ3 Data Logging dash for sale. This one replaced the near new one I had. I had one dead pixel on the older model screen and they sent me a new one of the current updated model. It logs predictive laps via GPS and collects information via inbuilt G meters, keep track of multiple items such as oil and water temp, gear, revs and it has the multi led shift lights that work their way from either side to centre red on shift. It has warning led's if you set them. You can complete track maps and overlay them to enhance your driving or compare lines, braking points and disect every corner as a stand alone. I also have a six meeting old Haltec Platinum Sport 2000 ECU set for my Proton but programmable for anything including V8's Call for this one. The Dash sells for $2300 but I have a quick price.
PRICE: $1,800CONTACT: 0414-670357

Scania + Trailer

2010-07-05T02:27:00.001-07:00

Scania P92 + 42ft trailer, which carries 2 large cars. Trailer has a two ton tail lift, 5.5 kva generator,tyre racks, extensive belly lockers, 240 volt power throughout, lots of workbenches which fold down for car space, and heaps of storage, including overhead storage and cupboard for race suits. Included is a full side annexe and awning, with clip-lock flooring of approx. 50 square metres, plus a rooftop observation deck. Prime mover has long range fuel tanks, good tyres, alloy bullbar, driving lights, stereo and CB + NSW local registration to October 2010. The trailer has registration to March 2011. The Scania and trailer are both very well maintained units and ready for racing!

For a complete information pack, please email paul@moveforce.com.au

PRICE: $44, 000 (Scania + Trailer) or $30,000 (Trailer only)

CONTACT: Ph: 0425 231 027

HDT Cup Commodores

2010-07-05T02:25:00.001-07:00

Six Ex Trackskill cars for sale.

These cars are for sale "as is". could suit HDT Cup or built into IPC car.

$6,800 ono ea or negotiate for the lot.
PRICE: $6,800 ono ea
CONTACT: Peter 08 9306 8022

Holden Special 'Chilli Roadster'

2010-05-15T01:18:00.001-07:00

A very unique Roadster. It is based on a 1960 Indy Watson Racecar, has a fiberglass body, jig built chassis and uses a 202 (LPG) HQ/HZ running gear. It weighs approx 800kgs and zips around the road &track. It is a fun car & as there is only two registered in NSW it certainly gets the looks.

The car as an Individually Constructed Vehicle (ICV). It was built using a custom chassis, body and a selection of donor parts from the H Series Kingswood’s to comply it for registration.

I built the car in 2003 with Rob Rowe of Rob Rowe Automotive, who is a well known and respected Historic Race Car Builder and first had it registered in December 2003.

Since building the car it has completed around 1,000 klms as I have the prototype which was built in 2002 which I use more regularly

The motor is a standard 202 bottom, with a HQ race cam and the head has had a little work. The gas system runs the Gas Research Carby on the bigger two barrel manifold.

The box is a 3speed M20 and runs back to a standard Banjo rear end.

We currently have four dedicated race cars that are campaigning again this year and a couple more are being built.

PRICE: $29,000 (incl.GST) Negotiable

CONTACT: Rod 0419 468 303

Motec ADL Dash Logger

2010-05-15T01:17:00.001-07:00

3IO Update
1 Mg Logging Memory Enabled
Pro Analysis Enabled
Dual Lambda Enabled

Comes with a bare loom & connections that needs to be shrink wrapped.

Retail Value New $10500.00

PRICE: $6500.00 ono
CONTACT: 0416 212 048

GTI Proton Satria #39

2010-05-03T03:29:00.001-07:00

It's time to sell the Class C 2nd place car for 2009. The car is ready to race and is the cheapest car in Australia at $10k.

It will not come with the Haltech ECU, Racepak Dash or the dry fuel break but I am negotialble on these and would like to sell the whole package complete.

It does come with spare engine, 2 gearboxes and many panels. It has a KAAZ limited slip diff. It will come with the Unichip ECU if you dont want the full package. Over 10 wheels and has near new A048's on the car.

The car must go for the build of my new HSV R8 12 Hour car. Serious offers only please.

PRICE: $10,000

CONTACT: 0414 670 357

Torana Genuine LH SLR5000 L31

2010-04-05T01:51:00.001-07:00

Cams approved race car with trailer. Turn key race set up. Location in Brisbane near Lakeside. Can deliver to Lakeside for test run,( has side Mega phone, so will need to change for a full run) or just drop in. Everything done ready to race.

PRICE: $30,000 ono

CONTACT: ph 0428 720 099

Triumph TR7 TR8

2010-04-04T03:25:00.001-07:00

3.5l Big Dollar Motor, EFI Haltech Twin Throttle Body, 5spd Supra Gear Box, Borg Warner LSD Diff, CAMS Log Book, Wilwood Front Brakes, Simmons Wheels, Kuhmo Tyres (raced 1 meeting), Spax and Koni Shocks, On vehicle much more to list. As raced at Morgan Park - iRace Series Round 2 Winner of the RocketSports category at recent meeting. Regretful sale - selling for price of motor.

Contact: Matt 0411 736 980

Price: $27,000

ISUZU FRR 500 LONG

2010-03-05T16:21:00.001-08:00

Trans: 5 SP MANUAL
Year: 1997
Body: C/CHAS
Engine Size: 8.2l
Fuel Type: diesel
Km's: 170000
Colour: White
Location: NSW - Sydney
Features:
Air Conditioning, CD Player, Power Steering

Description:
This truck is in very good conditiond serviced regularly, It has 22 ft pantech that is used for recording outside Television events locally and interstate, The truck has not carried heavy loads & has not done city driving. It also includes 2 seperate airconditioning units in the pantech, and is fitted with storage bays.

Price: $34,900.00

Contact Tracy: 02 9438 2088 or 02 9438 3099 or thannah@ave.com.au

HDT Cup/Rally VH SS

2010-02-15T03:10:00.001-08:00

This car belongs to a friend of mine. It would make a very very good HDT Cup/Muscle Div car.

It is listed on Ebay, so if you need to contact him please do so via Ebay. But if you get really desperate, drop me a line and I'll try and chase him up for you. Jon Worrell.

EBAY LINK

Price: $6,000

Wanted: Dymag 17x11 and 17x9.5 wheels

2010-02-06T21:53:00.001-08:00

WTB Dymag wheels sizes 17x11 and 17x9.5 five spoke wheels. Some of these wheels will have Perkins or Corvette wording cast into them.

Contact Brett Henderson: bv1953@aol.com

9" x 17 Rays wheels and almost NEW Pirelli slicks

2010-02-06T21:52:00.001-08:00

4 x 9" Rays rims $550 the set
The rims have served me faithfully and are extremely strong.
Suit RX-7 and some Nissans, Toyotas, Ford, FPV.
+38 offset x 114.3 x 5

4 x Pirelli slicks used for one weekend only. Two heat cycles. $600 the set. The slicks were purchased new for the W300 in November 2008 and were used in Qualifying and the first hour only. Still very usable. Always stored in black bags indoors. They never got mounted on the car in 2009 because I never made it to a race start and I use other rims/tyres for transport and practice.

$990 if you want the 4x 9" rims plus these 4 slicks

OR make an offer if you are buying all 8 Rays Silver Arrow rims with the 4 x Pirelli wets and these 4 slicks

Pick up from Windsor (On main road between Airport and Bathurst) or if you want to get your courier I can co-operate.

I am going to Bathurst next week and can take them up there if anyone wants but payment or at least a deposit first. Space is limited.

Delivery arranged anywhere with TNT. Good rate.

Steve 0428 219888

HDT Cup 5.0L 308ci Motor

2010-02-05T22:20:00.001-08:00

Ok up for sale is my old motor out of my VH Commodore. This motor needs a REBUILD it has spun 2 bigend bearings and the crank is marked and 2 rods look like they have gotten hot. Ok now to the good bits this motor has VN Commodore heads (have been shaved) and also has VN rods BIG cam (I can't remember the spec's But I know it comes on at 3000rpm). The motor is fitted with a Redline single plan manifold with a freshly worked Rochester carby, The motor also comes with a complete Exhaust and a set of Extractors this motor was making over 300HP at the wheels and would be good for any track car and would do well in HDT cup.

If you click on the link below it will take you to a video of the motor going around Bathurst.

http://www.youtube.com/watch?v=hZBTPfpfm3w
PRICE: 1000.00 ono
CONTACT: 0410651606

Pirelli Wets and Rays Wheels

2010-02-05T22:16:00.001-08:00

Strong 17 x 8 Rays Silver Arrow wheels. Currently fitted with Pirelli 225 62 17 wets bought new from Trofeo. Rare item. The wets have done only 8 laps in the wet just to remove the green. Mike Navybox at Wakefield was witness to their running in and supervised me doing so.

They are perfect wets. Never been raced on. No further use. Always stored indoors in black bags. Very soft. They were incredibly grippy when I ran them in in October 2009.

Rims $400 the set
Wets $1200 the set
OR $1400 if you want the 4 rims plus 4 wets mounted

Pick up from Windsor (On main road between Airport and Bathurst) or if you want to get your courier I can co-operate.

I am going to Bathurst and can take them up there if anyone wants next week but payment or at least a deposit first. Space is limited.

Delivery arranged anywhere with TNT. Good rate.

Steve 0428 219888

Motec Advanced Dash Logger

2010-02-05T22:10:00.001-08:00

Motec ADL Complete unit (Ex Nat. Series Formula Ford - V8 Supercar spec unit) Unmarked dash with internal logger, Suit Open Wheeler or Sedan. Price inc: Dash unit, 79 pin Gen. motec Loom with military spec plugs, Various sensors, steering wheel mountable Mode / Select buttons, LED shift light, Beacon, Receiver, Pwr lead, Tri-pod, Battery & Charger

Under half new price. All in Excellent - New Condition. Free postage Australia wide!

PRICE: $6,500 Neg.

CONTACT: 0404804859 or russellnewell@hotmail.com Email for further info and Pics

Class Winning HDT Cup Commdore

2010-01-02T20:00:00.001-08:00

Sold!

This car has had a full rebuild in the past few months, brand new 253 race motor, rebuilt m21 box, rebuilt diff, 330mm front brakes with VE Twin Spot Calipers, Rear brakes are 315mm with VE rear calipers, new Brake booster mod to fit VX master cylinder, full Pedder suspension including everything possible (Springs, shocks, bushes, adjustable camber tops, adjustable Castor rods), 16" rims with near new Bridgestone Semi Slicks, Sabelt Taurus Race seat with New harness, Car fully rewired front to back. This is a very clean, tidy, reliable, quick car.

This car has a current iRace log book, this car was the original Commodore Cup Display vehicle, Cage was built to commodore Cup Specs.

1st place in Class B 2009 HDT Cup, 2nd Place Overall.

Nothing to spend, ready to race.

Contact me for more specs and pics.

Only selling to upgrade.

Price: $12500

Contact: Troy 0410 480 534

Proton Satria GTi Production Racing Car

2009-12-16T22:12:00.001-08:00

This car was originally built for Proton at great expense. It has Proflex canister shocks with Eibach coil-over springs all round. An excellent rollcage, good brakes - Endless pads all round (new fronts). Rallyart LSD.

This is a great little Class C car and a great way to go racing in 2010. Parts are readily available and relatively cheap.

Has a good engine fitted, gearbox and clutch recently reconditioned. very economical to run and maintain.

6 wheels with Federal/Kumho tyres, also various spares to complete the package including spare engine, drivers door etc.

Has a few minor battle scars from this season which have been allowed for in the bargain price.

$12,500

Can deliver if required. Call Hans on 0414 670 026.

Mazda 3 MPS Production Racing Car

2009-12-14T02:24:00.001-08:00

2007 model Mazda 3 MPS Production Racing Car offered for sale. This car won the 2009 Class A Production Racing Car Championship.

2.3 litre Turbo engine, 6 speed manual gearbox, Murray Coote suspension, DBA 4K brake rotors and Endless Enduro pads.

$33,000 or best offer.

Contact Clark Stott or check out the listing on My105.com

Radical SR3 LeMans Sports Car

2009-12-11T13:53:00.001-08:00

Radical SR3 2004 model

2004, SR3 model

1498cc Hayabusa engine

$79850

Contact Rick Otten 0418 251 000 or 0408 471 199 or 02 4861 6626

ALFA 2003 GTA Production Racing Car

2009-11-23T22:46:00.001-08:00

ALFA 2003 GTA Production Racing Car

270 HP
3.2 L V6
6 Speed Gearbox
Quaife LSD
only 2 owners
Winner 2008 Alfa Series [4 Wins,1 Second]
1 min 10.7 Secs Wakefield Park
1 min 11.8 WP with 70 Year Old driver
1000km only on engine
Very competitive
No Accidents
Original Paint
6 Wheels
3 Sets of tyres incl. Wets
Many other Spares
Great looking and sounding car
Over $100K New

Reluctant Sale $33,000 or Best Offer
Contact Rick Otten 0418 251 000 or 0408 471 199 or 02 4861 6626

WANTED: HQ to HZ Holdens

2009-10-18T22:55:00.001-07:00

HQ to HZ Holdens wanted, or parts, (a 10 bolt salisbury diff in particular)for rebuilding into Rocket Sports Roadsters.

Contact Graham Smith, phone: 0425 210 267

Reynard 91D Formula Tasman / F Holden

2009-09-17T04:26:00.001-07:00

This very nicely presented, very fast, ex-Yvan Muller 91D Reynard is offered for sale with a comprehensive spares package, and ready to race.

The car has a very strong 3800cc Holden V6 (Ecotec), AiM datalogging, a 5-speed Reynard transmission, and all the features expected of a car of this caliber.

iRace, AASA and CAMS logbooks accompany the car, along with setup data.

$49,000

Contact Rod Dale for further details: 0412 785 486 or rod@irace.net.au

WANTED: Trackskill HDT Cup Car Wheels

2009-09-14T02:10:00.001-07:00

Wanted ROH Reflex commodore wheels as on the Trackskill cars

Contact Robert Marchese: 0419 252 257 rmarchese@robertoatley.com.au

MoTeC M400 ECU

2009-06-05T19:50:00.001-07:00

MoTeC ECU#2341, it has logging, lambda, advanced functions. To buy it new would cost $4202.05. I'll sell it for $3250.

Price: $3250

Contact: Steve Manning 0412 611 885